Top MOSFET,INTEGRATED CIRCUITS,INTEGRATED CIRCUIT Products in Mumbai at best prices

ESP32-S3-WROOM-1-N16R8 Espressif Systems

INR 280

GG105X is a high-performance dual-winding chip for PSR chargers, designed mainly for lithium battery chargers. It eliminates the auxiliary winding of the transformer, integrates current sampling resistors, and optimizes system costs. GG105X achieves high-precision constant voltage function through a built-in programmable module, and can directly charge lithium batteries; built-in LED light function, the precise light current point can accurately indicate the charging status. The chip realizes constant current and constant voltage functions by detecting the current and voltage of the primary side of the transformer, and has built-in loop stability compensation, which can omit TL431, optocoupler and auxiliary winding power supply.

INTEGRATED CIRCUITS

TPS22965DSGT Texas Instruments

The TPS22965x is a single channel load switch that provides configurable rise time to minimize inrush current. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.8 V to 5.7 V and can support a maximum continuous current of 6 A. The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals. In the TPS22965, a 225-Ω on-chip load resistor is added for quick output discharge when switch is turned off. The TPS22965x is available in a small, space-saving 2-mm × 2-mm 8-pin SON package (DSG) with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

INTEGRATED CIRCUITS

MCIMX6G2CVM05AB 289-LFBGA NXP

The i.MX 6UltraLite is a high performance, ultra efficient processor family featuring NXP’s advanced implementation of the single ARM Cortex®-A7 core, which operates at speeds up to 696 MHz. The i.MX 6UltraLite includes an integrated power management module that reduces the complexity of the external power supply and simplifies the power sequencing. Each processor in this family provides various memory interfaces, including LPDDR2, DDR3, DDR3L, Raw and Managed NAND flash, NOR flash, eMMC, Quad SPI, and a wide range of other interfaces for connecting peripherals, such as WLAN, Bluetooth™, GPS, displays, and camera sensors. The i.MX 6UltraLite is specifically useful for automotive applications such as: • Telematics • Human Machine Interfaces (HMI)

INTEGRATED CIRCUITS

STMPS2141STR SOT-23-5, STMicroelectronics

The STMPS2141, STMPS2151, STMPS2161, STMPS2171 power distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. These devices incorporate 90 mW N-channel MOSFET high-side power switches for power distribution. These switches are controlled by a logic enable input. When the output load exceeds the current limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant current mode. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts the switch off to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until a valid input voltage is present.

INTEGRATED CIRCUITS

UCC27282DR 8-SOIC Texas Instruments

The UCC27282 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27282 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27282 can be used in conjunction with both analog and digital controllers. The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. Input interlock further improves robustness and system reliability in high noise applications. The enable and disable functionality provides additional system flexibility by reducing power consumption by the driver and responds to fault events within the system. 5-V UVLO allows systems to operate at lower bias voltages, which is necessary in many high frequency applications and improves system efficiency in certain operating modes. Small propagation delay and delay matching specifications minimize the dead-time requirement which further improves efficiency. Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. An integrated bootstrap diode eliminates the need for an external discrete diode in many applications, which saves board space and reduces system cost. UCC27282 is offered in a small package enabling high density designs.

INTEGRATED CIRCUITS

L78M12CDT-TR IC REG LINEAR 12V 500MA DPAK

The L78M series of three-terminal positive regulators is available in TO-220, TO-220FP, DPAK and IPAK packages and with several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shutdown and safe area protection, resulting it essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5 A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents

INTEGRATED CIRCUITS

TLV274IDRN 14-SOIC Texas Instruments

IC OPAMP GP 4 CIRCUIT 14SOIC Operating from 2.7 V to 16 V over the extended industrial temperature range from -40°C to +125°C, the TLV27x is a low power, wide bandwidth operational amplifier (opamp) with rail to rail output. This makes it an ideal alternative to the TLC27x family for applications where rail-to-rail output swings are essential. The TLV27x provides 3-MHz bandwidth from only 550 µA. Like the TLC27x, the TLV27x is fully specified for 5-V and ±5-V supplies. The maximum recommended supply voltage is 16 V, which allows the devices to be operated from a variety of rechargeable cells (±8 V supplies down to ±1.35 V). The CMOS inputs enable use in high-impedance sensor interfaces, with the lower voltage operation making an attractive alternative for the TLC27x in battery-powered applications. All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package. The 2.7-V operation makes it compatible with Li-Ion powered systems and the operating supply voltage range of many micropower microcontrollers available today including TI’s MSP430.

INTEGRATED CIRCUITS

LNK364DN-TL 8-SOIC Power Integrations

IC OFFLINE SWITCH FLYBACK 8SO LinkSwitch™-XT incorporates a 700 V power MOSFET, oscillator, simple ON/OFF control scheme, a high-voltage switched current source, frequency jittering, cycle-by cycle current limit and thermal shutdown circuitry onto a monolithic IC. The start-up and operating power are derived directly from the DRAIN pin, eliminating the need for a bias winding and associated circuitry.

INTEGRATED CIRCUITS

W25Q32JVSSIQ 8-SOIC Winbond Electronics Memory IC

INR 40

INTEGRATED CIRCUITS

SDC5091MUTR-E1 SDC

INR 4

INTEGRATED CIRCUITS

IU86751E EQA16 IXU MICROELECTRONICS

INR 17

INTEGRATED CIRCUITS

MIX3007 MIXINNO SOP16

INR 7

INTEGRATED CIRCUITS

HC2018A HCW SOP-8

INR 3

INTEGRATED CIRCUITS

LC6516AB RichMicro

The LC6516AB is a high-performance primary-side controller (PWM) produced by RichMicro, specifically designed for low-power offline battery charger applications.

INTEGRATED CIRCUITS

HC2022A HCW SOP-8L

INR 3

INTEGRATED CIRCUITS

Mindmotion MM32G0001A1T (TR) - IC-3407-D

INR 8

CAPACITOR

R82EC4100CK70K KEMET CAP FILM 1UF 10% 100VDC RADIAL

INR 6

OPTOCOUPLER

TLP2395(TPL,E Toshiba Semiconductor, 6-SOIC

The Toshiba TLP2395 consists of two GaA ℓAs light-emitting diode coupled with a high-gain, high-speed photo detector. It is housed in the SO6 package. Since it is making two LED reverse parallel, it can be dealt with both sinking and sourcing input signals. The detector has a totem-pole output stage with current sourcing and sinking capabilities. The TLP2395 has an internal Faraday shield that provides a guaranteed common-mode transient immunity of ±20 kV/µs. The TLP2395 has a logic buffer output. An inverter output version, the TLP2398, is also available. Application Programmable Logic Controllers (PLCs) High-Speed Digital Interfacing for Instrumentation and Control Devices Simplex/Multiplex Data Transmission Features (1) Buffer logic type (totem pole output) (2) Package: SO6 (3) Supply voltage: 3 to 20 V (4) Threshold input voltage, low to high: IFLH = ±2.3 mA (max) (5) Propagation delay time: tpHL/tpLH = 250 ns (max) (6) Pulse width distortion: |tpHL - tpLH| = 80 ns (max) (7) Common-mode transient immunity: ±20 kV/ µs (min) (8) Operating temperature: -40 to 125  (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1) CQC-approved: GB4943.1, GB8898 Thailand Factory

Power Management (PMIC)/DC-DC Converters

DCR012405P Texas Instruments

INR 2000

GG1053 SOP7 GG MICRO

INR 3.25

Power Management (PMIC)/DC-DC Converters

IP6520_PPS INJOINIC ESOP-8

INR 19

LED DRIVER IC

SD7800TR SILAN SOP-8

PWM Flyback 1 SOP-8 LED Drivers ICs RoHS The SD7800 is a single stage primary side regulation (PSR) power factor correction (PFC) controller, specially designed for flyback LED driver. The SD7800 provides accurate constant current control and operates in boundary conduction mode (BCM) with high efficiency. The Device adopts primary side regulation eliminating the opto-couple, secondary feedback control and loop compensation for reducing design and cost. The SD7800 adopts constant on time operation to achieve high power factor. Due to patented close-loop control technology pin COMP and peripheral compensation network are unnecessary, and output current will not be affected by moisture or leakage current; thanks to patented THD technology, low THD is obtained without optimized THD network in most applications. The SD7800 provides completed protections such as input over voltage protection, input under voltage protection, LED short protection, LED open protection, cycle-by-cycle current limiting, and four section high temperature drop current and over temperature protection setting, etc.

MOSFET

CRJQ190N65GCF SJMOS N-MOSFET 650V, 185mΩ, 23A

INR 77

Microcontrollers

HT66F004 HOLTEK

The devices are Flash Memory type 8-bit high performance RISC architecture microcontrollers. Offering users the convenience of Flash Memory multi-programming features, these devices also include a wide range of functions and features. Other memory includes an area of RAM Data Memory as well as an area of true EEPROM memory for storage of non-volatile data such as serial numbers, calibration data etc. Analog features include a multi-channel 12-bit A/D converter function. Multiple and extremely flexible Timer Modules provide timing, pulse generation, capture input, compare match output, single pulse output and PWM generation functions. Protective features such as an internal Watchdog Timer and Low Voltage Reset coupled with excellent noise immunity and ESD protection ensure that reliable operation is maintained in hostile electrical environments. A full choice of HIRC and LIRC oscillator functions are provided including a fully integrated system oscillator which requires no external components for its implementation. The inclusion of flexible I/O programming features, Time-Base functions along with many other features ensure that the devices will find excellent use in applications such as electronic metering, environmental monitoring, handheld instruments, household appliances, electronically controlled tools, motor driving in addition to many others

INTEGRATED CIRCUITS

V30100C-M3/4W VISHAY

For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection.• Trench MOS Schottky technology • Low forward voltage drop, low power losses • High efficiency operation • Low thermal resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106

OPERATIONAL AMPLIFIERS

LM2904DT STMicroelectronics SOIC-8 SMD/SMT

INR 3

INTEGRATED CIRCUITS

TLV9001IDBVR IC CMOS 1 CIRCUIT SOT23-5

INR 5

MCU

STM32G070CBT6 STMicroelectronics IC MCU 32BIT 128KB FLASH 48LQFP

INR 58

CAPACITOR

TPSA106K010R0900 CAP TANT 10UF 10% 10V 1206 KYOCERA AVX

INR 4

Traics

BT138-600E,127 600V 12A WXDH ELECTRONICS

INR 7

Traics

BT139-600E TO-220AB 600V 16A WXDH ELECTRONICS

INR 9.5

Traics

BT137-600E TRIAC TO-220M WXDH ELECTRONICS

INR 6.1

INTEGRATED CIRCUITS

MT79398 DIP8 MAXIC IC

The Maxic MT79398 is a highly integrated, single-stage AC-DC LED driver IC with built-in active Power Factor Correction (PFC) and a 700V MOSFET, designed to simplify LED lighting designs by eliminating secondary-side feedback, offering high power factor, precise LED current control, and robust protection features like OVP, SCP, and OTR for reliable, high-efficiency applications.

INTEGRATED CIRCUITS

RT7100GC-U3YYY RICHTEK TSSOP-28

INR 80

INTEGRATED CIRCUITS

RT6543AGQW RICHTEK WQFN-20

INR 40

INTEGRATED CIRCUITS

MM32G0001A6T, MIND MOTION MICROELECTRONICS, 32-bit Arm Cortex

INR 6

INTEGRATED CIRCUITS

SN74HC595DR

The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3- state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state.

INTEGRATED CIRCUITS

CS5038E chipstar

CS5038E is a CMOS process !boost switching regulator, which mainly includes a reference voltage source, an oscillation circuit, an error amplifier. a phase compensation circuit, and a PWMIPEM switching control circuit. CS5038E built-in MOSLesign, only 12 peripheral components, simple peripheral circuit, can maximize the reliability of the power module and avoid the complexity of the power module design. CS5038E can provide up to 22V constant voltage output; it can ensure load stable operation under 10 average current. It can be applied to all kinds of terminal equipment with starting voltage as low as 2. 5V and wide working voltage range of 3V-16V. The CS5038E offers the package type of ESOP16 with a rated operating temperature range of - 40 °C to 850

TRANSISTOR

IRFP4668PBF INFINEON

INR 70

TRANSISTOR

IRFP4768PBF INFINEON 250V 93A TO 247AC

INR 75

MCU

STM32G070CBT6, STMicroelectronics, IC MCU 32BIT 128KB FLASH 48LQFP

ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit 64MHz 128KB (128K x 8) FLASH 48-LQFP (7x7) The STM32G070CBT6 is a 32-bit ARM® Cortex®-M0+ microcontroller from STMicroelectronics, designed for high-efficiency performance in embedded and industrial control applications. Operating up to 64 MHz, it features 128 KB Flash memory, 36 KB SRAM, and a rich set of peripherals including ADCs, DACs, timers, USARTs, I²C, and SPI interfaces. This MCU offers low power consumption and robust security features, making it ideal for applications such as consumer electronics, motor control, power management, IoT devices, and communication equipment. End Use: Industrial automation, consumer electronics, motor control units, IoT gateways, and power systems. Features • Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C operating temperature • Memories – 128 Kbytes of flash memory with protection – 36 Kbytes of SRAM (32 Kbytes with HW parity check) • CRC calculation unit • Reset and power management – Voltage range: 2.0 V to 3.6 V – Power-on/Power-down reset (POR/PDR) – Low-power modes: Sleep, Stop, Standby – VBAT supply for RTC and backup registers • Clock management – 4 to 48 MHz crystal oscillator – 32 kHz crystal oscillator with calibration – Internal 16 MHz RC with PLL option – Internal 32 kHz RC oscillator (±5 %) • Up to 59 fast I/Os – All mappable on external interrupt vectors – Multiple 5 V-tolerant I/Os • 7-channel DMA controller with flexible mapping • 12-bit, 0.4 µs ADC (up to 16 ext. channels) – Up to 16-bit with hardware oversampling – Conversion range: 0 to 3.6V • 11 timers: 16-bit for advanced motor control, five 16-bit general-purpose, two basic 16-bit, two watchdogs, SysTick timer • Calendar RTC with alarm and periodic wakeup from Stop/Standby • Communication interfaces – Two I2C-bus interfaces supporting Fastmode Plus (1 Mbit/s) with extra current sink, one supporting SMBus/PMBus and wakeup from Stop mode – Four USARTs with master/slave synchronous SPI; two supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature – Two SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, one multiplexed with I2S interface; four extra SPIs through USARTs • Development support: serial wire debug (SWD) • All packages ECOPACK 2 compliant

RF and Wireless

ESP32-WROOM-32E-N4, ESPRESSIF SYSTEMS

INR 190

OPERATIONAL AMPLIFIERS

LM2904DT STM

This circuit consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically for automotive and industrial control system. It operates from a single power supply over a wide range of voltages. The low power supply drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, these circuits can be directly supplied from the standard +5 V which is used in logic systems and will easily provide the required interface electronics without requiring any additional power supply. In the linear mode the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from a single power supply

INTEGRATED CIRCUITS

LP371BSH LP

INR 3

TRANSISTOR

PS2705-1-F3-A Optoisolator Transistor Output 3750Vrms 1 Channel 4-SOP

The PS2705-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light. It is designed for high density mounting applications

INTEGRATED CIRCUITS

CS8611E CHIPSTAR

CS8611E is a 2×15W+30W dedicated 2.1-channel D-class audio rate large circuit. The advanced EMI billion system technology enables the use of cheap magnetic loop filters in the output port to meet EMC requirements. CS8611E stereo two-audio power discharger is a system meter that needs to output high-quality audio power. It adopts surface station installation technology and only a small number of foreign devices. Make the system prepare for high-quality sound and annoying output power. 958011E has built-in overcurrent protection. Short-circuit protection and overheating protection effectively protect the chip from damage under abnormal working conditions. When the power supply is less than 16.0V, CS8611E can drive a 4Q bass and two 80 tweeters. The overall audio subsystem has an efficiency of up to 90%, so there is no need for additional open heat products when choosing to play music. CS8611E provides a small EQA28 packaging form for customers to choose from, which can save considerable PCBs for customers. Its rated working temperature range is- 40°C-85°C.

st

Subcategory Tags

Contact Us