Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108042755673 (International callers) or 08042755673 (Indian callers).
The L78M series of three-terminal positive regulators is available in TO-220,
TO-220FP, DPAK and IPAK packages and with several fixed output voltages, making
it useful in a wide range of applications. These regulators can provide local on-card
regulation, eliminating the distribution problems associated with single point
regulation. Each type employs internal current limiting, thermal shutdown and safe
area protection, resulting it essentially indestructible. If adequate heat sinking is
provided, they can deliver over 0.5 A output current. Although designed primarily as
fixed voltage regulators, these devices can be used with external components to
obtain adjustable voltage and currents
ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit 64MHz 128KB (128K x 8) FLASH 48-LQFP (7x7)
The STM32G070CBT6 is a 32-bit ARM® Cortex®-M0+ microcontroller from STMicroelectronics, designed for high-efficiency performance in embedded and industrial control applications. Operating up to 64 MHz, it features 128 KB Flash memory, 36 KB SRAM, and a rich set of peripherals including ADCs, DACs, timers, USARTs, I²C, and SPI interfaces.
This MCU offers low power consumption and robust security features, making it ideal for applications such as consumer electronics, motor control, power management, IoT devices, and communication equipment.
End Use:
Industrial automation, consumer electronics, motor control units, IoT gateways, and power systems.
Features
• Includes ST state-of-the-art patented
technology
• Core: Arm® 32-bit Cortex®-M0+ CPU,
frequency up to 64 MHz
• -40°C to 85°C operating temperature
• Memories
– 128 Kbytes of flash memory with protection
– 36 Kbytes of SRAM (32 Kbytes with HW
parity check)
• CRC calculation unit
• Reset and power management
– Voltage range: 2.0 V to 3.6 V
– Power-on/Power-down reset (POR/PDR)
– Low-power modes:
Sleep, Stop, Standby
– VBAT supply for RTC and backup registers
• Clock management
– 4 to 48 MHz crystal oscillator
– 32 kHz crystal oscillator with calibration
– Internal 16 MHz RC with PLL option
– Internal 32 kHz RC oscillator (±5 %)
• Up to 59 fast I/Os
– All mappable on external interrupt vectors
– Multiple 5 V-tolerant I/Os
• 7-channel DMA controller with flexible mapping
• 12-bit, 0.4 µs ADC (up to 16 ext. channels)
– Up to 16-bit with hardware oversampling
– Conversion range: 0 to 3.6V
• 11 timers: 16-bit for advanced motor control,
five 16-bit general-purpose, two basic 16-bit,
two watchdogs, SysTick timer
• Calendar RTC with alarm and periodic wakeup
from Stop/Standby
• Communication interfaces
– Two I2C-bus interfaces supporting Fastmode Plus (1 Mbit/s) with extra current
sink, one supporting SMBus/PMBus and
wakeup from Stop mode
– Four USARTs with master/slave
synchronous SPI; two supporting ISO7816
interface, LIN, IrDA capability, auto baud
rate detection and wakeup feature
– Two SPIs (32 Mbit/s) with 4- to 16-bit
programmable bitframe, one multiplexed
with I2S interface; four extra SPIs through
USARTs
• Development support: serial wire debug (SWD)
• All packages ECOPACK 2 compliant
This Power MOSFET series realized with STMicroelectronics unique STripFET™ process has specifically been designed to minimize input
capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency, high-frequency isolated DC-DC
converters for Telecom and Computer applications. It is also intended for any applications with low gate drive requirements.
